ab5r
Member
Posts: 4
|
Post by ab5r on Feb 7, 2010 18:05:42 GMT -5
OK, I've got the Vantage Vue and WeatherLink/Logger installed and working.
However, I'd like to run Weather Display software. The WeatherLink instructions are confusing to me and I would appreciate direction to WHERE I might find simple instructions for using Weather Display software with the Davis Vantage Vue & Logger.
Off Line contact would be accepted: ab5r@uspaytons.com Thank you, Jerry
|
|
|
Post by Admin on Feb 8, 2010 16:53:13 GMT -5
There ARE no simple instructions for Weather Display; it is a very complex program. You might want to try Cumulus - it's very robust and free. www.sandaysoft.com
|
|
ab5r
Member
Posts: 4
|
Post by ab5r on Feb 8, 2010 22:34:10 GMT -5
Boy! Have I found THAT out. Only problem is that I have bought it already.
Thanks for reply, Jerry
|
|
|
Post by Admin on Feb 9, 2010 16:46:17 GMT -5
Understood, and of course you've bought WeatherLink too in order to get the logger (or vice versa). I'd still encourage you to try the free software Cumulus - either way, you've already paid your money on Weather Display.
Having said that, if you're really unhappy with Weather Display - and believe me, it has many rabid fans - Brian Hamilton the developer is a really good guy, and will probably refund your money upon request.
|
|
ab5r
Member
Posts: 4
|
Post by ab5r on Feb 10, 2010 19:39:15 GMT -5
Thanks for the tip. Regardless that I have also bought the weather display, I don't want to throw in the towl just because I am a KNUCKLEHEAD.
I just wished I could find simple step by step instructions to get it to work with the logger or WeatherLink, which ever is the case.
I just do not understand the buy USB, but trick it into thinking it is a serial connection......or whatever the process is.
Seeeee! I told ya I was a knucklehead. :P
Regards, Jerry
|
|