|
|
Post by noaa on Jan 17, 2009 19:46:43 GMT -5
I have the Weatherlink with data logger for my Vantage Pro2, i want to upload my data to Weather underground, i have an account, and have my station registered but i dont know how to get my data to it. I am also a member of CWOP. Any thing would help, Thanks
|
|
|
|
Post by Admin on Jan 19, 2009 10:10:21 GMT -5
Use Internet Settings, then pick one of the profiles, and use the "reports" selection. Weather Underground is one of the options, enter your station ID, password, and select the update frequency desired.
|
|
|
|
Post by zephirus on Jan 19, 2009 14:48:35 GMT -5
If you are using WL USB or Serial, there is an Add In Module from WU you need to add. Once you add the module you just enter you WU station ID and other particulars and off you go. If you are using WLIP it is even easier, you just add your WU station ID on the WL website and your password (WU) and it does the rest. Find the Module on the WU website and just follow their instructions - its pretty straight forward. Hope that helps
|
|
|
|
Post by frank1938 on Feb 19, 2009 13:44:24 GMT -5
If you are using WL USB or Serial, there is an Add In Module from WU you need to add. Once you add the module you just enter you WU station ID and other particulars and off you go. If you are using WLIP it is even easier, you just add your WU station ID on the WL website and your password (WU) and it does the rest. Find the Module on the WU website and just follow their instructions - its pretty straight forward. Hope that helps When I click on Modules under File, I get no response Been trying to get my site back online after my old PC crashed. Not having much luck remembering the settings |
|
|
|
Post by zephirus on Feb 27, 2009 19:43:13 GMT -5
I would get the instruction from WU and download the dll again following the instructions carefully. You may need to install WL again and then install the WU dll. Just basic software trouble shooting. Its really hard to know what the issue is but with a fresh install it should work fine.
|
|
|
|
Post by bunglesmate on Mar 31, 2009 16:12:50 GMT -5
I have recently started uploading data to Weather Undergound after buying a Davis Vantage Pro2 with a WeatherLinkIP. To get my data onto Weather Underground I did the following. 1. You should already have registered an account at the Davis Weather website at www.weatherlink.com/. For this you need to know the two numbers supplied on the WeatherLinkIP. These are the DID and key. 2. You need to create an account in Weather Underground at www.wunderground.com/3. Once you have your WU account you need to create your own stations. This is achieved by selecting 'My Stations' in the small drop down menu at the top of screen which has the default setting of 'My Quick Menu' 4. Start the procedure for creating your new station and fill out the form. This should be fairly easy. 5. Once the station has been created it will appear in the box titled 'Your Current Stations'. Weather Underground assigns a station ID automatically. You will need to make a note of this ID, and your account password, for later in step 7. To get your WeatherLink data to WeatherUnderground you need to follow the next few steps. 5. Go back to your WeatherLink account at www.weatherlink.com/manage.php?login=1&fwd=16. Once logged in to your WeatherLink account, select the 'Uploads' link at the top of the page. 7. There are three entries, the last of which is for Weather Underground. Enter your station ID and account password. 8. Press the button marked 'Update Settings' It might take at least one data cycle before you see anything in the Weather Underground. Hope this helps somebody. Share & Enjoy. ZIppy. |
|
